9
PROGRAMMING
STEP 3. Set Station Run Times. (Continued)
To adjust the
Run time
in minutes
press
, and use
or
. To
set the run time in hours,
press
and
“0”
will appear and flash.
To adjust use
or
. If not required,
press
and advance to
station 2 by pressing the
button.
Continue until all the stations in Program 1 have been set with a
run time, or if a station (or stations) are not required to be active in
this particular program, ensure that the run time is set to
“OFF”
.
Remember all stations are set at a default run time of 10 minutes
in Program 1.
NOTE:
To set a station to “OFF”.
Use
when the
“RUN TIME”
is flashing. This completes the setting
up procedure for automatic watering of Program 1.
Should you need a second program.
Turn
the dial to
“Set Start Times”
and
“Prog 1”
will flash.
press
and change to program 2 position and follow the same 3 steps to set
an automatic watering program.
1. Set Starts
2. Set Watering Days
3. Set Station Run Times
TIP:
Remember to return the dial to the “Auto Run” position after
completing the set up of an automatic program.
This will ensure that the automatic cycles will take place.
Содержание 3506
Страница 23: ...21 SPARE WATERING PLANNER ...
Страница 24: ...22 NOTES ...
Страница 25: ...23 NOTES ...
