manualshive.com logo in svg

K-Rain 2000 Series, Инструкция по эксплуатации

Поделиться
Скачать
K-Rain 2000 Series Скачать руководство пользователя страница 4

SETTING AND OPERATING INSTRUCTIONS

03

•  TO SET THE DAY OF THE WEEK AND TIME OF DAY: Turn the Day Wheel until correct day 

is indicated by arrow labeled “DAY”. Turn the Time Dial CLOCKWISE until the correct time  

is indicated at the arrow labeled “TIME”.

  CAUTION: Set time dial in CLOCKWISE direction only. 

DO NOT FORCE TIME DIAL IN REVERSE DIRECTION.

•  TO OPERATE MANUALLY: Turn Auto-Off-On switch to ON. When operation is no longer 

needed, turn Auto-Off-On switch back to OFF.

•  TO SET DAILY OPERATION: There are 14 days to program on the day wheel. For each  

day that operation is desired, the day will pin should be pushed down fully. For days where 

operation is not desired, the day with pins should be pulled out gently.

•  TO SET OPERATING TIMES: The 24 hour Time Dial has ninety-six 15 minute increments.  

The timing pins should be inserted in the Time Dial to indicate the desired operating times. 

Included with each controller is a package of white 15 minute pins. Longer timing periods  

may be obtained by placing white pins directly next to each other in Time Dial. Also available  

are shorter duration 7 minute pins (yellow) and 4 minute pins (orange).

•  TO SET CONTROLLER TO OPERATE A MULTIPLE ZONE VALVE: The operating times for 

each zone are represented by one pin or by a group of pins in the Time Dial. Omit at least 

one pin between each zone of pins in Time Dial.

•  TO START AUTOMATIC OPERATION: Once the correct time and day have been set and the 

desired operating times have been programmed, the Auto-Off-On switch knob should be 

turned to AUTO.

!

EC    REP

Содержание 2000 Series













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды