1
FUNCTIONS & FEATURES
1.
Big LCD which displays frequency and all kinds of information
2.
Dual digital LED channel display
3.
USE EL technology for backlight
4.
PA
、
CW
、
AM
、
FM
、
USB
、
LSB mode
5.
A
、
B
、
C
、
D
、
E
、
F , 6 bands in total, with 60 channels at most in
each band to be programmed.
6.
Frequency Tuning Step can be 10 Hz, 100 Hz, 1 KHz or 10 KHz.
7.
Multiple CLARIFIER Operating Modes
8.
Flexible menu functions and PC programming software to meet
varied customer demands
9.
ECHO function
10.
SQ, ASQ function (FM and AM mode only)
11.
RF GAIN adjustment
12.
RF PWR adjustment
13.
SCAN function
14.
RB function
15.
NB/ANL function
16.
DW (dual-watch) function
17.
Beep voice prompt
18.
+10 KHz function
19.
SWR
、
S/RF
、
DC Voltage display function
20.
TOT function
21.
HI-CUT function
22.
EMG call
23.
SWR protection
24.
Power supplied voltage protection
25.
Key-Lock function
WARNING
To use the radio, please connect the antenna to the location "B" on the
back panel of the equipment firstly and then set the SWR (Standing
Wave Ratio) before transmitting. Failure to do so may result in
destruction of the power amplifier, which is not covered by the guarantee.
RESET FUNCTION (Resume Factory Default)
This Radio introduces RESET FUNCTION to prevent accidents
and provide a solution for customers who changed some functions
unconsciously and do not know how to resume normal settings. The
Radio will resume factory default once this function is activated.
How to operate:
Step 1:
Power off the radio.
Step 2:
Press and hold FUNC and SCAN keys at the same time,
followed by powering on the radio.
Step 3:
Release the two keys when LCD displays "RES".
All former settings would be replaced by Factory Default value when
LCD displays "REND" .
WARNING:
All former settings would be replaced by Factory Default
value after operating the RESET FUNCTION.
26.
VOX function
27.
CTCSS/DCS code
28.
RX compander
29.
Noise gate setting
30.
RX Noise Reduction
31.
Mic type slection