Remarks:
Pairing mode will last 10 minutes. If no devices can be connected over 10
minutes, BTC008L will back to standby mode. If you want to repair,
please turn off BTC008L first and then enter pairing mode again.
After successful pairing, BTC008L and the Bluetooth cell phone will
remember each other, BTC008L will not need to re-pair with the
Bluetooth cell phone next time unless the pairing information is deleted
because of a new pairing.
Every time BTC008L is turned on, it will connect to last connected
devices automatically.
Under the status of standby mode, and non-connected with devices, short
press
button,
button or
button once, BTC008L will
connect with last connected device.
3) Pairing BTC008L with multi-devices
BTC008L can connect with two Bluetooth devices at the same time.
The general pairing procedures are as follows:
1) Pairing BTC008L with device one.
2) Turn off device one, then turn on BTC008L and make it enter pairing
mode again, pairing with device two.
3) Operate device one to connect with BTC008L. BTC008L has already
connected with two devices in this moment. BTC008L will connect to the
two devices automatically after rebooting.
Remark:
Turn on: In standby mode(not connected) or pairing mode, long press
button and
button for 2 seconds, release it until you hear four raise
tone
Turn off: In standby mode(not connected) or pairing mode, long press
button and
button for 2 seconds, release it until you hear four
fall tone
To improve the stabilization of headset, we suggest you turn off the
multi-pair function when you only connect with one cell phone.
5
