6. Factory reset
In the status of turned on and not connect with Bluetooth device, long press
button,
button and
button about 2 seconds simultaneously, and
release it until red LED of
button and blue LED of
button flash
twice simultaneously.
Remarks:
After factory reset, all the paired list will be deleted. When you turn on
BTC023, it will enter pairing mode automatically, and you need to pair
with Bluetooth device again.
Care and maintenance
Read the following recommendations before using BTC008L. Following
these you will be able to enjoy our product for many years.
Keep it dry and don’t take it to damp places to avoid the product’s
internal circuit being affected.
Keep the product away from direct sunlight or hot places. High
temperatures will shorten the life of electronic devices. Don’t expose the
product to cold areas. It may damage the internal circuit board.
Don’t try to disassemble the product as it may get damaged if you are not
professional.
Don’t let it fall down onto the floor or other hard surfaces. The internal
circuit might get damaged.
Don’t use intensive chemical products or detergent to clean the product.
Don’t scratch the surface with sharp things.
In case the product doesn’t function properly, send it to the store you bought
it. The staff will help you to solve the problem.
FAQs
1.
Why is the red LED of the
button light on permanently?
The lighting red LED means that BTC008L already established a connection
with a Bluetooth HFP device, ready to make calls.
10
