K.M.E. SD 3, Руководство пользователя

Страница: 23 / 28

VERSIO SD 5 (use preset no. 3)
audio input audio input
channel A
speaker
output A
(top unit)
channel A
speaker
output B
(bass)
channel A speaker
output B
(bass)
channel B
speaker
output A
(top unit)
channel B
of SD 5 o each top unit,
from speaker outputs “Out B” into each bass
Note!
Please note specific and useful set-up of a first-class loudspeaker system. A universal
statement about the correct (standard)-adjustment and set-up of PA systems is
impossible, because each reinforcement is bound to a different place and has always
different features.
When using high stands or distance rods for top parts the user has to guarantee the
stability. Please use just certified mounting material when installing the systems to
guarantee the safety. Depending on the features of the area/room to be reinforced the
top unit(s) can also be swiveled a bit horizontally and tilted vertically to reduce reflections
(on walls + ceilings) and interferences and therefore achieving a better utilization of the
sound energy.
The set-up of the PA is followed by the cabeling of the power supply and the audio signal
in this order:
1. Set-up power supply.*
2. Plug the XLR-cables (audio signal channel A+B) in the VSS 15.
3. When switching o the system please mind that all volume potentiometers are turned
fully anti-clockwise / left stop (to avoid an unwanted sound reproduction) and that all
could start in the „lock cti “ (if sav set
to 0 dB which could cause an immediate reproduction.
he power supply connection of the PA systems (SD 3 / SD 4 / SD 5) is always made by
used electric circuit. Please mind that it is not coming to
d loop during cabeling of the system. If it comes to deep-frequent hum switch the
-Free to „Free“. Always use balanced signal cables if possible. Do not mask or
detach the conducter connection on the mains plug!
Danger!
channel B
: from speaker outputs “Out A” int scheme of the power-output connection
n
connected components are switched on and muted previously because the VSS 15
-fun on ed previously) and for example the volume is
*T
the supplied IEC plug on a 16A f
a groun
Ground