K-Line AT30000, Руководство по эксплуатации, Страница: 4 / 8

4
H
EIGHT
R
ANGE
:
11.50” to 30”
L
OAD
L
IMIT
:
2 Tons per Jack (4,000 lbs.)
1. Slide one section of track under the tractor. The
hook end of the track should be pushed under
the tractor fi rst.
(Image 1)
Connect the second section of track to the fi rst
by placing the hooks of the second track over
the pins of the fi rst track so that they interlock
with each other. Center the two tracks under
the tractor and position the tracks to allow for
suffi
cient distance to split the tractor as required.
NOTE: Both track sections are identical. Order of
tracks under the tractor does not matter. The rails
of the track sections must be clean and free from
debris to allow for safe splitting of the tractor.
2. Place the stationary stand under the tractor in
between the rails of the track. Position this stand
as close as possible to the point where the tractor
will be split.
(Image 2)
Add spacers as necessary to the stationary stand.
There are two tall spacers and one short spacer
for each stand. The tops of each spacer and stand
have slots and holes cut into them. These holes
and slots allow the user to bolt the spacer to
the stand, each other and to the bottom of the
tractor.
K
IT
C
ONTENTS
:
P
ART
# D
ESCRIPTION
Q
TY
AT30001 Rail/Track Assembly (50” Long/ea.) 2
AT30002 Stationary Jackbase Assembly 1
AT30003 Rolling Jackbase Assembly 1
AT30004 Tall Spacers (5” Tall) 4
AT30005 Short Spacers (3” Tall) 2
AT30011 Ratchet Tiedown Straps 2
Image 1
Image 2
U
SE AND
I
NSTRUCTIONS
WARNING: P
OTENTIAL
C
RUSH
H
AZARD
! DO NOT
WORK BENEATH LOAD
.
WARNING: T
HE WORK AREA WHEN USING THIS SYSTEM
MUST
BE FLAT
,
SOLID
,
LEVEL
,
AND FREE
FROM DEBRIS AND FLOOR INCONSISTANCIES
.