10
3
K-Line™ G-Set™ Solenoid Wiring Assembly
Using the included wire nuts, you are
able to connect the solenoid (latch)
coil to the controller.
Connect black latch wire to black
controller wire and the green latch
wire to the red controller wire. This
is achieved by the use of the wire
nuts included.
Red to green wire
Black to black wire
This is how the C1013 controller should be mounted.
Installing the Connectors
1. Strip wires ½"
2. Align frayed strands or conductors
3. Do not pre-twist. Place stripped
wires together with ends even.
4. Twist connector onto wires pushing
firmly until hand-tight.
DO NOT over torque
5. Swipe excess sealant in and
around conductors.
Do not reuse
6
6
7
7
