Klein + Hummel
Operating Manual SRC 1
16
(E)
Safety and Warnings
In addition to specific warnings throughout this document, please observe
these additional general instructions. The term “loudspeaker” includes the
case when the electronics of an active loudspeaker is installed into a
Remote Electronics Kit, or when it is still located in the back of the cabinet.
This symbol means that a high voltage is to found nearby.
Take appropriate precautions to avoid electric shocks.
This symbol means that hot parts of the product may be found
nearby. Take appropriate precautions to avoid burns.
General
•
Keep these instructions in a safe place for future reference.
•
Failure to follow the safety and warning instructions contained in this
document voids the warranty.
•
This product should be used for the intention for which it was designed
and as described in this document.
Environment
•
Ensure that the room in which you use this product is wired in
accordance with the local electrical code and checked by a qualified
inspector.
•
A correctly earthed mains power connection should always be used.
•
If access to the interior electronics is required, disconnect it from the
mains power and allow electrical energy storage devices, such as
capacitors and transformers, to discharge.
•
Other electronic products may generate sufficient heat to require
ventilation.
•
Do not block or cover heatsinks, fans, or vents.
•
Unless otherwise stated, this product is designed to be used indoors
only.
•
Do not expose this product to water, any other liquids, moisture, or
naked flames.
•
Do not install this product into hot, humid, or excessively dusty
locations, or into direct sunlight.
•
Avoid installing this product into locations where it will experience
externally generated vibrations or heat (e.g. radiators).
•
If the product is moved from a cold environment into a warm one (such
as from a vehicle into a building), it is possible that condensation will
