Page 12
2.1 Positioning / Mounting
The studio monitor O 500 C has been designed
as a Main / Midfield-Monitor, and may be used
as a main monitor in smaller or midsize control
rooms / studios.
The minimum distance to the listening position
should be at least 2,5 meters.
Ways of mounting:
-
on a stand with mounting bracket LH35
-
on all surfaces with the tilting adaptor LH 36,
in a combination with the TV spigot LH 29, or
the tripod stand adaptor LH 28.
-
from the ceiling with mounting bracket LH 35
-
free standing on a stand or pedestal
-
flush-mount into a wall
- For more detailed information on the many
possibilities and adaptors, please see our
studio catalogue SO1, pages 42 and 43
For the best result it should be taken into account
that the main direction of dispersion of the O
500 C corresponds to the axis vertically between
midrange system and tweeter.
When positioning the monitor please make sure
to select the right height for the speaker position,
which can be adjusted / corrected by using the
tilting adaptor LH 36. Fig. 2.1/1 shows the
dimensions and the positioning of the mounting
points on the bottom and the sides.
Mounting on a tripod
Fig. 2.1/2 shows how the O 500 C is mounted
Fig. 2.1/1: The dimensions of the O 500 C
RESET
Rear panel may
become too hot
to touch
ANALOG INPUT
SERIAL PORT
DIGITAL S/P-DIF
INPUT
DIGITAL AES/EBU
INPUT
THROUGH
SUBWOOFER
Leave enough
space for proper
ventilation
HOT
This equipment
is capable of delivering sound pressure
levels in excess of 90 dB/SPL, which
may cause permanent hearing damage.
CAUTION!
To prevent the risk of fire and shock hazard don´t expose
this appliance to moisture and rain.
Do not remove rear panel.
Refer to qualified service personnel for service.
No user serviceable parts inside.
SB 6,3 A
T 3,15 A
CAUTION!
Replace fuse only with same type and rating
transformer
balanced
RS 232 IN
MIDI IN / MIDI OUT
electr.
balanced
INPUT
SECTION
PIN 1 =
PIN 2 =
PIN 3 =
+
-
Choose electronically
balanced input for
optimized performance
PIN 1 =
PIN 2 =
PIN 3 =
HIGH RESOLUTION MIDFIELD REFERENCE MONITOR
3 AMPLIFIER POWERED SYSTEM
24 BIT, FIR-FILTER-CONTROLLED
MAGNETICALLY SHIELDED
O
500
C
KLEIN+HUMMEL
KLEIN+HUMMEL GmbH D-73760 Ostfildern
MADE IN GERMANY
GROUND
CONNECTED
LIFTED
POWER
AC 50 - 60 Hz Max. power consumption 1500 VA
MAINS
AC 117 V~
AC 230 V~
WARNING!
