K-BUS CHTF-05 Скачать руководство пользователя страница 8

Страница: 8 / 61

Fig. 5.1 parameter window ―General Setting‖ (1)

Parameter “System menu language”

This parameter is used to set menu language of the TFT operation system, there are 16

languages can be selected for the user.

Currently, only support Chinese and English.

Parameter “Warning tone”

This parameter is used to set whether the warning tone is enabled. If enabled, the TFT will

make a sound when its graphic button is operated. Options:

Off

Parameter “Indicator LED”

This parameter is used to set whether the indicator LED (K-BUS logo) is turned on. If turned on,

the place where the TFT is mounted is known easily in the evening. Options:

Off

Parameter “Operation password”

This parameter is used to set operation password. After the TFT executes block operation, if

you want to operate the TFT again, you need enter into the password. It also can be used to disarm

when the security is activated (see chapter 5.9). If you want to open the setting window, you also

need enter into it. Option: 0…999999

Parameter “Screen saver”

This parameter is used to set whether screen saver of the TFT is activated. Options:

Inactive

Clock

Album

If selecting ―clock‖, when the TFT enters into the screen saver, the clock will be shown in the

screen, and the backlight of screen will also be not switched off. At this time, the backlight is set in

Содержание CHTF-05






























































Результаты поиска

Содержание CHTF-05

Отзывы:

K-BUS CHTF-05, Руководство пользователя, Страница: 8 / 61

Результаты поиска

Содержание CHTF-05

Отзывы: