K-BUS CHTF-05 Скачать руководство пользователя страница 49

Страница: 49 / 61

No.

Object function

Name

Data type

Flags

166

Setpoint

Air condition

2byte

C,R,W,T

This communication object is used to read out the setpoint, modify the temperature setpoint or send out the

setpoint on the bus according to the parameter setting. In the default parameter settings, the setpoint can only be read

out.

167

Air Condition on/off

Air condition

1bit

C,T

The communication object is visible with ―1bit‖ in the parameter ―object type for control air condition‖, which

is used to send out a telegram with air-condition on/off.

Telegram value:

1——air condition on

0——air condition off

When the object sends a telegram ―off‖, other button can be operated, but no telegrams are sent. To facilitate

control air condition, the TFT will record temperature, speed and swing icons state for each mode, so when switch

the modes, it may appear that the display setpoint is inconsistent with the actual setpoint.

167

IR command number

Air condition

1byte

C,T

The communication object is visible with ―1byte‖ in the parameter ―object type for control air condition‖, which

is used to send out a telegram with control command of air-condition, the telegram values corresponds to different

commands are set via the parameters.

168

Mode heating/cooling

Air condition

1bit

C,T

The communication object will be visible with ―1bit‖ in the parameter ―object type for control air condition‖,

which is used to send out a telegram with switching to the heating mode or the cooling mode.

Telegram value:

1——heating mode

0——cooling mode

169

Mode auto/dry

Air condition

1bit

C,T

The communication object will be visible with ―1bit‖ in the parameter ―object type for control air condition‖,

which is used to send out a telegram with switching to the auto mode or the dry mode.

Telegram value:

1——auto mode

0——dry mode

170

Switchover high/medium speed

Air condition

1bit

C,T

The communication object will be visible with ―1bit‖ in the parameter ―object type for control air condition‖,

which is used to send out a telegram with high fan speed or medium speed.

Telegram value:

1——high fan speed

0——medium fan speed

171

Switch to low speed

Air condition

1bit

C,T

The communication object will be visible with ―1bit‖ in the parameter ―object type for control air condition‖,

which is used to send out a telegram with low fan speed.

Telegram value:

1——low fan speed

Содержание CHTF-05






























































Результаты поиска

Содержание CHTF-05

Отзывы:

K-BUS CHTF-05, Руководство пользователя, Страница: 49 / 61

Результаты поиска

Содержание CHTF-05

Отзывы: