K-array Mugello-KH I, Руководство пользователя, Страница: 16 / 36

Mugello-KH I
User Guide
16
Rigging Procedures
Suspended Array
Needed Equipment
Name Description Image Apply to
K-HCFLY2 I
Bumper for KH2 I-KS3 I
- BLACK
KH2 I / KH2P I
KS3 I / KS3P I
K-HCFLY2W I
Bumper for KH2 I-KS3 I
- WHITE
KH2 I / KH2P I
KS3 I / KS3P I
K-HCFLY35 I
Bumper for
KH5 I-KH3 I-KS4 I - BLACK
KH5 I / KH5P I
KH3 I / KH3P I
KS4 I / KS4P I
K-HCFLY35W I
Bumper for
KH5 I-KH3 I-KS4 I - WHITE
KH5 I / KH5P I
KH3 I / KH3P I
KS4 I / KS4P I
K-HCFLYST2
Fly bar for KH2 I
step array
KH2 I / KH2P I
K-HCFLYST
Fly bar for KH5 I-KH3 I
step array
KH5 I / KH5P I
KH3 I / KH3P I
K-STEPM2 I
Step array hardware for
KH2 I (kit for 1 unit)
KH2 I / KH2P I
K-STEPM3 I
Step array hardware for
KH3 I (kit for 1 unit)
KH3 I / KH3P I
K-STEPM5 I
Step array hardware for
KH5 I (kit for 1 unit)
KH5 I / KH5P I
K-HCLINK2/35
Adapter to join KH2 I
to a KH3 I or a KH5 I (or
cluster)
KH5 I / KH5P I
KH3 I / KH3P I
KH2 I / KH2P I
Key rigging components must be inspected before
each use.
Any rigging components found to be defective,
or even suspect might be defective should be
replaced with equivalent approved part.
Always use properly rated rigging hardware.
K-array is not responsible for any rigging equipment
and accessories that are not manufactured by
K-array.
K-array loudspeaker and hardware are intended for
suspension from approved rigging points only.
Ensure that the total weight of the loudspeakers
and additional hardware assembly in use is
lower than the Working Load Limit (WLL) of the
suspension points.
Rigging and flying loudspeaker systems shall be
accomplished by knowledgeable and experienced
professionals.
It is the user’s responsibility to ensure that the use
and suspension of heavy loudspeaker systems
conform to all applicable laws and regulations in
force at the time and location.