K-array KU26, Руководство пользователя

Страница: 15 / 16

KU26 Ver. 1.3
15
12. TEChNICAL SPECIFICATIONS
ACOUSTICS
Power handling 2 x 80 W
Impedance 8 / 32 Ω selectable (2 x 16 Ω )
Frequency range (-10 dB) 45 Hz – 150 Hz
(1)
SPL 1W/1mt 98 dB
(2)
Maximum SPL 115 dB (cont.) – 121 dB (peak)
(3)
COVERAGE
Horizontal omni
Vertical omni
CROSSOVER
Type External crossover required
Frequency Low pass @ 150 Hz
TRANSDUCERS
Type 1 x 6” Neodymium magnet with 1.5” voice coil
Type 1 x 6” passive transducer
POWER AUDIO IN/OUT
Connectors 1 x 4-pin phoenix connector
Wiring Serial or parallel
RECOMMENDED AMPLIFIERS
Type KA14, KA24
CERTIFICATION
IP 54
(More complete water protection with K-KUIP accessory)
PHYSICAL
Dimensions 35.0 cm x 18.0 cm x 11.9 cm (13.8“ x 7.1” x 4.7“)
Weight 5.9 kg (13.0 lbs)
Notes for data
1. With dedicated preset;
2. Measured @4 mt then scaled @1 mt;
3. Measured with musical signal
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.