K-array KH4, Руководство пользователя

Страница: 11 / 32

P. 11 USER'S MANUAL
3 . ID setting
4 . Single module control
On this bars you can see all the
modules connected in your net.
Pressing this button you can have a
refresh of the modules connected.
ADDRESS FOR REMOTE CONTROL
ID 39
KH4FL01
FROM PC OR PREVIOUS MODULE
TO NEXT MODULE
PRESET LOADED
ADDRESS X 10
PRESET SCROLL
RESET BUTTON
ADDRESS X 1
Click once on the ID module
that you want control.
P r e s e t s l o t s o n t h e
Module status panel
This frame describes the state of all the loudspeakers on the net.
The colour of the little rectangles into this frame represents the
status of the loudspeakers. Each loudspeaker has three rectangles.
Here there is the meaning of the rectangle's colour.
Two rectangles on top:
: the loudspeaker is not present on the net.
: one module inside that loudspeaker is
over-temperature.
: all modules inside that loudspeaker
have a good temperature.
: at least one module inside that
loudspeaker is in protection.
: all modules inside that loudspeaker
are working properly.
: if this rectangle is black it means that
the loudspeaker is not responding.
The main causes of this malfunction are
loss of power supply and loss of serial
connection between the hub and the
loudspeaker. Check the hardware. If
this rectangle is black will be black also
the Protection/Fail.
Protection/Fail rectangle black: see
above.
The remaining rectangle: Is related to
the mute function; if red, the related
loudspeaker is in "mute" status.
Both rectangles grey
Temperature rectangle red
Temperature rectangle green
Protection/Fail rectangle red
Temperature rectangle green
Temperature rectangle black