K-array KH2 Скачать руководство пользователя страница 5

KH2

Ver. 1.

4

5

This symbol alerts the user to the presence of 
recommendations about the product’s use and 
maintenance.

The lighting flash with arrowhead symbol within 
an equilateral triangle is intended to alert the 
user to the presence of not isolated, dangerous 
voltage within the product enclosure that may 
be of magnitude to constitute a risk of electrical 
shock.

Read these instructions - Keep these instructions - Heed all warnings

4. SAFETY INFORMATION

Warning. Failure to follow these safety instructions could result in fire, 
shock or other injury or damage to the device or other property.

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep this instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings.  Install in accordance with the manufacturer’s instructions.

 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

 Do not defeat the safety purpose of the polarized or grounding-type plug.  A polarized plug has two
blades with one wider than the other.  A grounding type plug has two blades and a third grounding
prong.  The wide blade or the third prong are provided for your safety.  If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.

 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus.

 When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time.

 Refer all servicing to qualified service personnel.  Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

Содержание KH2


















Отзывы: