K-array KH2, Руководство пользователя, Страница: 17 / 17

KH2 Ver. 1. 4
17
13. TEChNICAL SPECIFICATIONS
Transducers
Frequency range
1
Maximum SPL 2
Coverage
Notes for data
1. With dedicated presets.
2. Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
3. EIAJ sine wave 8/32 burst
New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
Input Sample Rate and
Resolution Frequency
Built-in DSP
Controls
Connectivity
GENERAL
2x 8” neodymium magnet woofer with
2.5” voice coil
2x compression driver with 2.5” voice coil
120 Hz – 19 kHz (- 6 dB)
136 dB (peak)
110° horizontal
20° vertical (preset dependent)
INTERNAL PROCESSING
Up to 96 kHz @ 24 bit with internal SRC
and jitter correction
Input gain, delay up to 330 ms,
8 full parametric IIR filters (Peaking,
Shelving, Hi/Lo pass, Hi/Lo Butterworth),
FIR filter for electronic beam steering
Onboard preset,
Level and temperature remote
monitoring
CONTROLS AND CONNECTIVITY
Remote control with dedicated PC
software via USB or RS485.
Onboard touch screen display.
Analog:
2x XLR (bal) input signal
2x XLR (bal) parallel output
Digital:
1x XLR AES3 input
1x XLR AES3 output
Remote connectivity:
1x XLR RS485 serial input
1x XLR RS485 serial output
1x USB-B inlet
MAINS:
1x powerCON
1x powerCON link
T ype
Peak Output Power
Operating Range
Power Consumption
Protections
AMPLIFIER MODULE
2-ch., switch mode, class D
2x 1000 W @ 8 Ω 1% THD+N 3
100-240V AC, 50-60 Hz with PFC
300 W @ 8 Ω load, Pink noise 1/8 rated power
Over Temp. (Power Limiting – Thermal
Shutdown), Short Circuit/Overload Output
Protection, Power Limiting, Clip Limiter/
Permanent Signal Limiter, High Frequency
Protection
Dimensions (WxHxD)
Weight
IP rating
HANDLING
860 x 370 x 210 mm (33.8 x 14.6 x 8.2 in)
with rigging hardware
735 x 285 x 200 mm (28.9 x 11.2 x 7.9 in)
net dimensions
29 kg / 63.93 lb (with rigging hardware)
20 (53 with K-AMPCOVER accessory)