K-array KA7 Скачать руководство пользователя страница 23

ENGLISH

23

Cleaning:

• Clean the product enclosures using  a soft, dry cloth only.
•  Do  not  use  any  solvents,  chemicals,  or  cleaning  solutions  containing  alcohol, 
ammonia, or abrasives.
• Do not use any sprays near the product or allow liquids to spill into any openings.

To obtain service:
1) Contact the official K-array distributor in your country. They will direct you to the 
service centre.
2) If you are calling for  service, have the serial number(s) of the unit(s) at hand for 
reference. Ask for Customer Service, and be prepared to describe the problem clearly 
and completely.
3) If the problem cannot be resolved over the phone, you must return the unit for 
service.
4) You will be given an RA (Return Authorization) number for job tracking. Refer to 
this number on shipping materials and in all correspondence concerning the repair. 
Shipping charges are the responsibility of the purchaser.

Any attempt to modify or replace components of the device will invalidate your 

warranty. Service must be performed by an authorized  K-array service center.

K-array KA7-7  are warranted against manufacturing defects in materials or 
craftsmanship over a period of 2 years from the date of original purchase. During the 
warranty period K-array will, at its discretion, either repair or replace products which 
prove to be defective, provided that the product is returned in its original packaging, 
shipping prepaid, to an authorized K-array service agent or distributor. K-array cannot 
be held responsible for defects caused by unauthorized modifications, improper use, 
negligence, exposure to inclement weather conditions, acts of God or accidents, or any 
use of this product that is not in accordance with the instructions provided by K-array.
K-array is not liable for consequential damages.
This warranty is exclusive and no other warranty is expressed or implied.
This warranty does not affect your statutory rights.

12. SERVICE

13. WARRANTY

Содержание KA7





























Отзывы: