4
Battery Installation
Open battery compartment and install the 8XAA batteries being sure to follow the polarity markings
inside the battery compartment.
Close the battery cover.
Inserting / Removing the TF card
Insert the TF card into the TF card port and push until it locks in place.
To remove the installed TF card, please push the TF card inward to release it.
Storage capacity: 8GB or above is recommended
Instructions for Use
Power On
: Press the power button still for about 2 seconds to start the Night Vision Device.
Taking a Photo
: Press the [
MODE
] button and selecting the capture photo mode. The icon
will appear in the top left corner of the screen. Press the [
SNAP
] button to take photos.
Taking Video
: Press the [
MODE
] button and select the video mode. The icon
will appear in
the top left corner of the screen. Press the [
SNAP
] button to start recording video and press the
[SNAP] button again to stop recording.
Watching Stored Videos and Photos
: Press the [
MODE
] button and select playback mode.
Deleting Stored Videos and Photos:
In playback mode, press the [
SNAP
] button. You will be
given the option to play or to delete the image and video.
Turning off the Night Vision device
Press the power button to the right side for 2 seconds to turn off the Night Vision device.
Содержание WG500B 1080P
Страница 1: ...1 WG500B 1080P USER MANUAL...