JYTEK USB-62401 Скачать руководство пользователя

Страница: 57 / 62

Important Safety Instructions

Important Safety Instructions

For user safety, please read and follow all

instructions

WARNINGS

CAUTIONS,

and

NOTES

marked in this manual and on the associated

equipment before handling/operating the equipment.



Read these safety instructions carefully.



Keep this user’s manual for future reference.



Read the specifications section of this manual for detailed

information on the operating environment of this equipment.



When installing/mounting or uninstalling/removing equipment:



Turn off power and unplug any power cords/cables.



To avoid electrical shock and/or damage to equipment:



Keep equipment away from water or liquid sources;



Keep equipment away from high heat or high humidity;



Keep equipment properly ventilated (do not block or cover

ventilation openings);



Make sure to use recommended voltage and power source

settings;



Always install and operate equipment near an easily

accessible electrical socket-outlet;



Secure the power cord (do not place any object on/over the

power cord);



Only install/attach and operate equipment on stable surfaces

and/or recommended mountings; and,



If the equipment will not be used for long periods of time,

turn off and unplug the equipment from its power source.

Содержание USB-62401































































Результаты поиска

Содержание USB-62401

Отзывы:

Похожие инструкции для USB-62401

Бренды по названию

Популярные бренды

JYTEK USB-62401, Руководство пользователя

Результаты поиска

Содержание USB-62401

Отзывы:

Похожие инструкции для USB-62401

Бренды по названию

Популярные бренды