Step 9
1. Sequentially use 1 x Angled Floating Pulley Bracket (
15
), 3 x Pulleys (
62
), 3 x M10×55mm Allen Bolts
(
90
), 6 x M10 Washers (
100
), 3 x M10 Spring Washers (
99
) and 3 x M10 Aircraft Nuts (
102
) to connect
the Butterfly Cable (
39
), and hang both ends of the cable on the hook of the L&R Butterfly Adjustment
Frame (
20&21
).
2. Attach 2 x Pulleys (
62
) to the left and right Swivel Pulley Bracket (
25
) using 2 x M10×55mm Allen Bolts
(
90
), 4 x M10 Washers (
100
), the left and right Safeguard Cover(
112&113
), 2 x M10 Spring Washers
(
99
)
，
2 x M10 Aircraft Nuts (
102
), 4 x Cable Retainers (
43
) and 4 x Cable Retainer Bushings (
107
),
refer to Diagram
A
.
3. Attach 1 x Pulley (
62
) to the top of the Angled Floating Pulley Bracket (
15
) using 1 x M10×55mm Allen
Bolt (
90
), 2 x M10 Washers (
100
),1 x M10 Spring Washers (
99
),1 x M10 Aircraft Nut (
102
), 2 x Cable
Retainers (
43
) and 2 x Cable Retainer Bushings (
107
), refer to Diagram
B
.
Note:
The #25 bolts in area
A
do not need to be
tightened and require
moderate slack. The
direction must not be
wrong, otherwise it will
lead to insufficient length
of other steel cables.
The #112 is a protective
accessory, which can be
selectively installed
according to the usage
environment.
Содержание JXL-1150
