Stereo CD Player with Dual Alarm Clock Radio V11M11_IM_EN_10102007
www.jWIN.com
- 14 -
TROUBLESHOOTING GUIDE / SPECIFICATIONS
When the instructions in this manual are followed, this unit should function properly. However, if
any of the following difficulties occur and cannot be corrected by the user or if a problem arises
that is not mentioned here, please contact jWIN Customer Service or a qualified service
technician.
1.
Unit Does Not Play
•
Unit may be disconnected from power source. Check connection.
•
Disc is not correctly set. CDs should be inserted label side up.
•
Disc is scratched or dirty. Please clean.
•
The lens is dirty. Wipe clean gently with soft, dry cloth. Follow the instructions of the
lens cleaner.
•
There is moisture on the lens wait an hour and try again.
•
For CD playback,
FM/AM/CD
Switch must be in the
CD
position.
•
Improper disc may be inserted. This unit does not play MP3 or WMA discs.
2.
No Sound, Distorted Sound or Feedback
•
Disc is scratched or dirty. Please clean.
•
Volume control is turned down. Please increase.
•
The unit may be located where there is vibration. Move unit if necessary.
3.
Radio Reception is Unclear
•
Radio station frequency may be weak. Adjust antenna or move near a window.
4. Alarm
does
not
function
•
The
ON/OFF/AUTO/BUZZ
Switch may not be set in proper position. Set to
AUTO
or
BUZZ
.
•
Alarm function may not be set. Ensure that
ALARM 1
,
ALARM 2
, or
ALARM 1+2
icons appear on the LCD screen.
5.
“No” appears on screen even with CD inserted
•
Disc may be improperly inserted. Ensure that it is placed in the CD compartment with
the label side facing up.
Specifications
•
Frequency
Range
o
AM: 530kHz – 1710kHz
o
FM: 87.5MHz – 108MHz
•
Power
Requirement
o
AC 120V, 60Hz
o
Battery: 9V battery for clock backup (battery not included)
•
Power Consumption: as low as possible
General description
Power source:
AC 230V ~ 50Hz
Output power: 1 W / channel
?????
* Specifications and features are subject to change without prior notice.
