JV-TV5020 USER’S MANUAL
JV-TV5020
USER’S MANUAL
8-CHANNEL QUAD SPLITTER 8-CHANNEL QUAD SPLITTER
menu screen. Pressing MODE/MENU button again, the
following menu screen will be displayed.
5-5-1.
Page 1 GENERAL Menu
The following items can be adjusted or programmed on this
menu screen.
Fig 6. Page 1 Menu
a.
Set the TIME
- Place the cursor to the time digit using the ◀ or the▶
buttons, and press the ENTER button to flash the TIME
(HH:MM:SS) and set it using the ▲ or the ▼ buttons.
Press the ENTER button again to stop flashing the TIME.
-
Use the ◀ and the ▶ buttons to shift the cursor to the
next digit.
- The TIME is displayed in military form of time.
-
Press ENTER button the EXIT location to exit in this mode,
the splitter will display the quadrant pictures.
b.
Set the DATE
- Place the cursor to the date digit using the ◀ , ▶ ,▲
and the ▼ buttons, and press the ENTER button to flash
-
Connect the DC power cord between this splitter and your
wall mounted power outlet.
-
Turn on the power of all cameras and this splitter.
-
A quadrant display should be seen on the monitor.
4-2. Installation with a VCR or Time Lapse Recorder
This splitter may be installed with a standard VCR or a Time
Lapse Recorder. Perform following steps to install the splitter
with them.
Fig. 4 INSTALLATION WITH A VCR
-
Connect all cameras to the splitter.
VCR (Rear view)
VIDEO OUT VIDEO IN
[ GENERAL ]
TIME : 00:00:00
DATE : 01/01/2002
DATE FORMAT :MM/DD/YYYY
TIME DISPLAY : [Y]
TITLE DISPLAY : [Y]
BOUNDARY LINE : [Y]
BLANK COLOR : [BLUE]
ALARM TIME : OFF
EXIT : [Y]
- PAGE1 -
13
