JVD RB3383, Руководство пользователя

Страница: 33 / 47

- When the weather station is in the same area as Germany, the time zone is set to 00, one hour slower than
German time, the time zone is set to -01, one hour faster than German time, the time zone is set to 01, 2
hours faster than German time, time zone Set to 02.
- Exceeding the German signal tower diameter of 1500KM or more, the signal received by the radio clock
signal is very poor. It is recommended to set the RCC to OFF.
Setting the daily alarms:
- Press and hold down“ ” button more than 3 seconds until Alarm 1 Time hour display of the Alarm 1 time
starts to flash. Use the “
▲
” and “
▼
” buttons to set the required hour.
- Press “ ” button to confirm your setting, The Minute display of the Alarm 1 time starts to flash. Use the
“
▲
” and “
▼
” buttons to set the required minute.
- Press “ ” button to confirm your setting, The Repeat icon “M-F” of the Alarm 1 time starts to flash. Use
the “
▲
” and “
▼
” buttons to set the alarm repeat in “M-F” or “S-S” or “M-F” and “S-S”.
- Press “ ” button to confirm your setting, the snooze time of the Alarm1 starts to flash. Use the “
▲
”
and “
▼
” buttons to set the minute of snooze you need.
- Press “ ” button to confirm your setting, The Hour display of the Alarm 2 time starts to flash. Use the
“
▲
” and “
▼
” buttons to set the required hour.
- Press “ ” button to confirm your setting, The Minute display of the Alarm 2 time starts to flash. Use the
“
▲
” and “
▼
” buttons to set the required minute.
- Press “ ” button to confirm your setting, The Repeat icon “S-S” of the Alarm 2 time starts to flash. Use
the “
▲
” and “
▼
” buttons to set the alarm repeat in “M-F” or “S-S” or “M-F” and “S-S”.
- Press “ ” button to confirm your setting, the snooze time of the Alarm2 starts to flash. Use the “ ▲ ”
and “ ▼ ” buttons to set the minute of snooze you need.
- Press “ ” button to confirm your setting and to end the setting procedure.
- During the alarm time setting process, press the “ ” button to exit the setting mode directly.
F.Y.I.:
- After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal
clock mode.
- The alarm is repeatedly set to M-F, the alarm function will be activated from Monday to Friday, the
Saturday and Sunday will be invalid. The alarm is repeatedly set to S-S, and the alarm function will be
activated on Saturday and Sunday, and will expire from Monday to Friday. When the alarm is repeatedly set
to display both M-F and S-S, the alarm function will be activated throughout the week.
- The snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze time
unit is minutes.
The alarm for opening and closing:
- Press “ ” button can switch the display ALARM1 time or ALARM2 time, in the alarm1 or alarm2 display
mode, press the “
” button to turn the alarm on or off.
- The alarm 1 or alarm 2 turn on, the “ ” or “ ”icon is displayed, the alarm 1 or alarm 2 function is open,
The repeat of alarm icon at the same time is also displayed.
- The alarm 1 or alarm 2 turn off, the“ ” or “ ”icon disappears, the alarm 1 or alarm 2 function is close.
F.Y.I.:
- The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm
will be repeated automatically after 24 hours.
- Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is
heard.
Switching off the alarm signal:
- The alarm sound when the trigger, press any buttons except the “ ” button or press and hold the “
” button for more than 2 seconds to stop the alarm signal.
Snooze function:
- When the time is up to the alarm, press the “ ” button, the alarm signal stops, and enter the SNOOZE
mode. After the snooze time is counted, the alarm will ring again.
- In snooze mode, press any buttons except the “ ” button or touch the “ ” icon position and hold
for more than 2 seconds to exit the snooze mode.
F.Y.I.: