ENGLISH
37
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Installing the unit (in-dash mounting)
Installation/Connection
Removing the unit
1
Detach the faceplate.
2
Fit the catch pin on the extraction keys into the holes on both sides
of the trim plate, then pull it out.
3
Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.
Installing the unit (without mounting sleeve)
1
Remove the mounting sleeve and trim plate from the unit.
2
Align the holes in the unit (on both sides) with the vehicle mounting
bracket and secure the unit with screws (supplied/commercially
available).
Use only the specified screws. Using wrong screws might damage the
unit.
Do the required wiring.
(Page 38)
Bend the appropriate tabs to hold the sleeve
firmly in place.
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
Dashboard of your car
JS_KWD_KDC_X704_KN_EN.indd 37
JS_KWD_KDC_X704_KN_EN.indd 37
5/3/2019 3:42:44 PM
5/3/2019 3:42:44 PM