ENGLISH
63
CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
1
Audio Video input (AV-IN1)
• Video input (Yellow)
• Audio left input (White)
• Audio right input (Red)
2
AV-OUT/Video output (Yellow)
3
Rear view camera input (Yellow)
4
Front view camera input (Yellow)
5
iPod/Audio Video input (iPod/AV-IN2)*
1
6
NAVI I/F input
7
TV tuner remote control output
8
HDMI/MHL input
9
Subwoofer preout (monaural output)*
2
• Subwoofer left output (White)
• Subwoofer right output (Red)
p
Rear preout*
2
• Audio left output (White)
• Audio right output (Red)
q
Front preout*
2
• Audio left output (White)
• Audio right output (Red)
w
Audio output (ø3.5 mini jack)
Resistance-free stereo type mini plug
e
Steering wheel remote controller input
• Connect to the vehicle’s steering remote
harness using the Steering Remote cable (
6
).
Contact your Kenwood dealer for details.
*
1
When connecting the component to play on
“AV-IN2”
, use the
Audio and Video cable CA-C3AV (optional accessory).
*
2
When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
❏
Connecting microphone for Bluetooth
Connect the microphone (
7
) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
7
DDX̲Mid̲M.indb 63
DDX̲Mid̲M.indb 63
2015/12/24 14:52
2015/12/24 14:52