Getting started
6
XV-NA7SL/LET0212-004A/English
Getting started
Connections
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
• Do not connect the AC power cord until all other connections have been made.
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a
VCR may cause a monitor problem when playing back a copy-protected disc. You may also have a monitor problem
when connecting the unit to an integrated TV/Video system.
Connection to a conventional TV
You can enjoy playback by simply connecting the unit to a TV.
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
Before making any connections
NOTES
• In the following description, "TV" may be substituted with "monitor" or "projector."
• Terminal names used for other components may be different from those used in the following description.
To connect to a TV
NOTE
• When you connect the unit to a TV with the VIDEO OUT (VIDEO or S-VIDEO) jacks or SCART connector, the unit outputs PAL
signal only. If you connect the unit to a TV with these ways, make sure that the NTSC/REMOTE/PAL switch set to "PAL."
The unit
VCR
TV
Connect directly
AV COMPU LINK
PCM / STREAM
COAXIAL
SUBWOOFER
CENTER
LEFT
RIGHT
REAR
FRONT
OPTICAL
VIDEO
S-VIDEO
DIGITAL OUT
AUDIO OUT
COMPONENT
Y
P
B
P
R
AV OUT
VIDEO OUT
VIDEO SIGNAL SELECTOR
Y/C
REMOTE
NTSC
PAL
VIDEO
/S-VIDEO
/AV OUT
PAL
COMPONENT
COMP.
/RGB
VIDEO
AUDIO
RIGHT
LEFT
IN
The unit
In this connection, set the VIDEO
SIGNAL SELECTOR to "COMP./RGB."
Yellow
Red
VIDEO SIGNAL SELECTOR
Yellow
Red
White
TV
Audio/Video cable (supplied)
White
In this connection, set the NTSC/
REMOTE/PAL switch set to "PAL."
XV-NA7SL(B).book Page 6 Wednesday, July 31, 2002 1:00 PM