![JVC XV-DDV1SL Скачать руководство пользователя страница 17](http://html.mh-extra.com/html/jvc/xv-ddv1sl/xv-ddv1sl_service-manual_177466017.webp)
(No.XA010)1-17
3.2.7 Removing the switch board
(See Figure 13)
• Remove the DVD mechanism assembly.
(1) From the top side of the DVD mechanism assembly, re-
move the screw
H
attaching the switch board.
(2) Lift the switch board slightly and then remove the wire from
connector
CN101
on the switch board.
3.2.8 Removing the loading motor assembly
(See Figure 1, Figure 13, Figure 14, Figure 15)
• Remove the DVD mechanism assembly.
(1) From the back side of the DVD mechanism assembly, dis-
connect the card wire from connector
CN202
on the DVD
servo control board. (See Figure 1)
(2) From the top side of the DVD mechanism assembly, re-
move the two screws
I
attaching the clamper base assem-
bly.
(3) Disconnect the wire from connector
CN101
on the switch
board while lifting the clamper base assembly slightly and
remove the clamper base assembly.
(4) Remove the screw
K
attaching the roller holder assembly.
(See Figure 1)
(5) Remove the three screws
J
attaching the roller holder as-
sembly and take out the roller holder assembly.
(6) Disconnect the wires from connectors
CN103
and
CN104
on the loading motor assembly.
(7) Remove the belt of the loading motor assembly.
(8) Remove the two screws
L
attaching the loading motor as-
sembly and take out the loading motor assembly.
Fig.13
Fig.14
Fig.15
DVD mechanism assembly
Clamper base assembly
Switch board
CN101
H
I
I
Roller holder
assembly
J
J
Belt
Loading motor assembly
CN103
CN104
L
L
Roller holder
assembly