![JVC XV-DDV1SL Скачать руководство пользователя страница 14](http://html.mh-extra.com/html/jvc/xv-ddv1sl/xv-ddv1sl_service-manual_177466014.webp)
1-14 (No.XA010)
3.2.3
Removing the DVD pickup unit
(See Figure 3, Figure 4, Figure 5)
• Remove the DVD servo control board.
• Remove the DVD traverse mechanism assembly.
(1) From the top side of the DVD traverse mechanism assem-
bly, remove the screw
C
attaching the bracket.
(2) Remove the claw
f
attaching the thrust spring and then
take out the thrust spring.
(3) Remove the lead screw from the section
g
and then re-
move the shaft 1 from the section
h
.
(4) Disengage the section
i
of the DVD pickup unit and then re-
move the DVD pickup unit with the shaft 1.
(5) Pull the shaft 1 out of the DVD pickup unit.
(6) Remove the two screws
D
attaching the SW. actuator.
Fig.3
Fig.4
Fig.5
DVD traverse mechanism assembly
Bracket
DVD pickup unit
Shaft 1
C
Section
h
Section
g
Section
i
Claw
f
DVD pickup unit
Shaft 2
Shaft 1
Thrust spring
Lead screw
Shaft 1
DVD pickup unit
D
SW. actuator