background image

13

XL-MC222BK

?????

Symptom

Possible Cause

Remedy

The CD is not played.

The CD is not loaded.

Load the disc.

The CD is not placed in the slot with its

Reload the disc correctly.

label on the left side.

A disc has been placed outside of the

Specify the slot number and open the disc

loading area

storage door.  Then close the door.

The CD is damaged.

Replace the disc with a new one.

The AC power cord is disconnected.

Connect the cord securely.

The audio cord is disconnected.

Connect the cord securely.

The sound is intermittent or harsh.

The CD is soiled.

Clean the surface using a piece of soft cloth.

The CD is scretched or warped.

Replace the disc with a new one.

A piece of paper or adhesive tape is stuck

Remove it cleanly.

to the CD surface.

The audio cord is placed close to the AC

Separate them.

powercord.

The remote controller does not

The batteries are exhausted.

Replace the batteries.

properly work.

The remote controller is not properly used.

Its maximum range is 7 meters (23 feet) and
30 degrees away from the component.

The component does not operate.

The built-in microcomputer is not properly

Disconnect the AC power cord and connect

functioning due to static electricity or other

it again.

disturbance.

TROUBLESHOOTING

What appears to be a malfunction may not always be serious and can easily be corrected. The table below describes some typical problems
and their remedies. Check them before calling your JVC dealer.

XL-MC222/E B

97.7.15, 5:59 PM

13

Содержание XL-MC222BK

















Отзывы: