JVC VN-H657BU Скачать руководство пользователя страница 59

Страница: 59 / 120

Trigger Position Number

Set the preset position number to be used as the

trigger when [1st Trigger] is set to “Position”.

[Set values: 0 to 99]
Memo :

Specify the setting for Preset Position in [PTZ

Settings] of Built-in Viewer.

(

p.94 [ [PTZ Settings] ] )

Time

Executes an action at the time you have entered.

[Set values: 00

M to 23

Day/Night

This is enabled when “Day/Night” is selected for the

[1st Trigger] item.

Color:

Executes an action when the image switches

from black-and-white to color.

Black & White:

Executes an action when the image switches

from color to black-and-white.

[Set values: Color, Black & White]

Time Filter

For specifying the alarm action with respect to each

day of the week and setting the corresponding time

of the day.

Applicable day of week:

Sunday, Monday, Tuesday, Wednesday,

Thursday, Friday, Saturday

Alarm action:

Unmask All, Mask All, Unmask Span, Mask

Span

Applicable time period:

Specify the starting and ending time of the alarm

in hours and minutes.

[Alarm Environment] Page

This page sets up the alarm environment.

This page can be used during access using

“admin” or “operator”.

Click [Advanced Settings] in the side menu, and

click [Alarm Environment].

Press the [OK] button to enable the new

settings.

If the [OK] button is pressed upon entering an

invalid value, a warning message will appear

and the entry will be denied. Press the [Cancel]

button to restore the invalid entry to the value

before the change was made. If you press the

[Cancel] button, other changed items will also be

restored to the values before the change was

made.

Settings

* Setting values with

are default values.

Mail Settings

For setting the mail environment when [Mail] is

specified as an action on the Alarm page. If [SMTP

Server], [Port Number], and [Send Mail Address]

are set, the alarm action is displayed as “Preset”.

SMTP Server

For setting the IP address or FQDN of the SMTP

server.
What is FQDN (Fully Qualified Domain Name)?

：

This is a fully qualified domain name that indicates

a notation method of describing the entire host or

domain name on the TCP/IP network without

abbreviating.

For example, if the host name is www and the

domain name is jvckenwood.co.jp, this will be

denoted as “www.jvckenwood.co.jp” in FQDN.

Japanese cannot be used in FQDN. If FQDN is

specified, set also the DNS server on the Network

page.

(

p.75 [ DNS Server ] )

[Advanced Settings] Page -[Alarm] Page

tti

Us
in

g In

ter

net

xplor

Содержание VN-H657BU

























































































































Результаты поиска

Содержание VN-H657BU

Отзывы:

Похожие инструкции для VN-H657BU

Бренды по названию

Популярные бренды

JVC VN-H657BU, Инструкция по эксплуатации

Результаты поиска

Содержание VN-H657BU

Отзывы:

Похожие инструкции для VN-H657BU

Бренды по названию

Популярные бренды