JVC VN-H237VPU, Инструкция по эксплуатации

Страница: 46 / 114

46
Internet Explorer Setting
Auto Patrol Page (continued)
Memo:
●
Register the position in [PTZ Settings] of Built-in Viewer. (
A
Page 94)
●
Press the [OK] button to enable the new settings.
●
If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the
change was made. If you press the [Cancel] button, other changed items will also be restored to the
values before the change was made.
Note:
●
You can use the Digital PTZ for frame sizes 640 x 360 and 640 x 480 only. (
A
Page 16)
* The [Set values] in bold letters are factory defaults.
Settings (continued)
A B C D E
Click [Advanced Settings] and [Auto Patrol].
A
No. Switches camera images in sequence from No. 0 to No. 19.
B
Title Shows the title of position.
C
Position Sets a sequence of position numbers where the camera moves.
[Set values: 0 to 19]
D
Stay Time Sets a time interval to display the image of the respective position. (in seconds)
Select "Skip" for positions that you do not want to display by Auto Patrol.
[Set values: Skip , 10, 20, 30, 45, 60, 120 ]
E
Moving speed Set a movement speed to the target position.
[Set values: Moment , Low, Mid, High ]