16
3-3
Setting the VN-C3U IP address
The V.NETWORKS setup tool is in the ¥Victor folder on the CD-ROM.
Execute ¥Victor¥setup¥vsetup.exe directly from the CD-ROM.
Enter the VN-C3U IP address.
F a c t o r y s e t ( D e f a u l t ) I P
address 192. 168. 0.2
Change to an IP address
assigned or approved by the
network administrator.
(192.168.0.2 is used as an
example in the diagram.)
Specify normal installation
(with the lens unit of the VN-
C3U at the bottom of the body)
or inverted installation (with the
lens unit of the VN-C3U at the
top of the body), depending on
the installation conditions.
This setting reduces flicker
under fluorescent lighting.
S p e c i f y 5 0 H z o r 6 0 H z i n
accordance with the power
supply frequency used in the
installation area.
The camera ID corresponds to the
identification code located on the VN-
C3U body. Only alphanumerics can be
entered.
The user does not participate directly.
Normally, consecutive numbers such
as CAM00001, CAM00002..... will be
set.
Set the subnet mask to a value suitable
for the setting operation. If the value is
unknown, check with the network
manager.
❉
Refer to the next page for Password button and Page 20 for Alarm
button.
VM-C3U̲E.65J
00.4.7, 5:34 PM
16
