5. Remove the CRT socket
˝
.
Fig. 1-10
When reassembling the CRT to the set, put the spring
Ô
onto the pin on the bottom cover without fail.
Fig. 1-6
Fig. 1-8
Fig. 1-9
2
6. Shortcircuit the anode of the CRT to the chassis or the FBT
cover for discharge, and then disconnect the anode plug
Ó
.
Note: The anodic electrode is located inside the rubber
cover of the anode plug
Ó
. When discharging, be
careful not to get an electric shock.
7. Loosen one screw
6
fixing the CRT to the deflection yoke
and remove the soldering
ˆ
.
Pull the CRT out of the deflection yoke in the direction of the
arrow (
f
).
1.3 REMOVAL OF MAIN BOARD
1. Open the bottom cover referring to “1.1 REMOVAL OF
COVER”.
2. Remove four screws
7
and the MAIN board can be de-
tached.
Fig. 1-7
Ó
˝
ˆ
6
Ô
PIN
7
7
