UX-A7DVD
1-28 (No.22013)
2.4.3
Removing the pickup
(See Fig.17~19)
• Prior to performing the following procedure, remove the feed
motor assembly.
(1) Remove the screw
l
, the
T
spring(S) and the shaft holder
with the plate.
ATTENTION:
When reassembling, reattach the
T
spring (s) correctly to
press the shaft
(2) Detach the part
n
of the shaft upward and move the part
o
in the direction of the arrow, then remove the shaft from the
spindle base.
(3) Release the joint
p
in the direction of the arrow.
(4) Pull out the shaft from the pickup.
(5) Remove the two screws
J
attaching the actuator.
(6) Release the joint of the actuator and the lead spring, and
pull out the lead spring.
ATTENTION:
When reattaching the pickup, attach the spring under the
shaft (See fig.19)
Fig.17
Fig.18
Fig.19
T spring(S)
Plate
p
Pickup
o
Shaft holder
Spindle base
n
I
Shaft
Pickup
J
Actuator
Actuator
Lead spring
Lead spring
Spring
Shaft
Pickup
