background image

ENGLISH

13

MODEL

Type

Colour system

Picture tube

TM-A140PN-A

VIDEO A

VIDEO B

AUDIO A

AUDIO B

Audio power output

Built-in speaker

Environmental conditions

Input terminals

Colour video monitor

PAL, NTSC (3.58)

36 cm measured diagonally,

90° deflection, in-line gun,

vertical line trio type

(phosphor stripe pitch 0.64 mm)

Effective screen size

Width        280.8 mm
Height       210.6 mm
Diagonal   335.4 mm

Scanning frequency

H : 15.734 kHz (NTSC), 15.625 kHz (PAL)

V : 59.94 Hz (NTSC), 50 Hz (PAL)

Horizontal resolution

320 TV lines or more

   (Y/C input mode)

Composite video: 1 line, BNC connector x 2,

1 Vp-p, 75 

 negative sync

  (bridge connection possible, auto termination)

Composite video: 1 line, BNC connector x 2,

1 Vp-p, 75 

 negative sync

(bridge connection possible, auto termination)

Y/C-separated: 1 line, mini-DIN 4-pin connector x 1

  Y: 1.0 Vp-p, 75 

C: 0.286 Vp-p, 75 

 (NTSC), 0.3 Vp-p, 75 

 (PAL)

  1 line (monaural), RCA pin x 2, 0.5 V rms, high-impedance

  (bridge connection possible)

  1 line (monaural), RCA pin x 2, 0.5 V rms, high-impedance

  (bridge connection possible)

1 W (monaural)

8 cm round x 1, impedance of 8 

  

Operation temperature: 0 – 40 °C

Operation humidity: 20 – 80% (non-condensing)

230 V AC, 50/ 60 Hz

0.55 A (230 V AC)

12.2 

kg

AC power cord (2 m) x 1 (for United Kingdom)
AC power cord (2 m) x 1 (for European countries)

Width       346 mm
Height      310 mm
Depth       368.5 mm

Power requirements

Power consumption

Dimensions

Weight

Accessory

SPECIFICATIONS

* Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly.
* Dimensions and weight are approximate.
* E. & O. E.  Design and specifications subject to change without notice.

Содержание TM-A140PN-A

















Отзывы: