JVC TM-1650SDU - Color Monitor, Инструкция по эксплуатации

Страница: 12 / 20

12
Functions (Items)
Initialization
(setting)
SHARPNESS 00
COLOR TEMP. 6500
COLOR SYSTEM AUTO
ASPECT RATIO 4–3
RGB/COMPONENT RGB
COMPO. LEVEL 00
BLUE CHECK OFF
H. POSITION 00
V. POSITION 00
WHITE BALANCE
R. CUT OFF
00
G. CUT OFF 00
B. CUT OFF 00
R. DRIVE 00
B. DRIVE 00
CONTROL LOCK OFF
STATUS DISPLAY ON
INPUT REMOTE OFF
ASPECT REMOTE OFF
PHASE 00
CHROMA 00
CONTRAST 00
BRIGHT 00
VOLUME 20
<SET–UP MENU> RESET
Are you sure ?
“Yes” then <CONTRAST>
“No” then <+> or <–>
Sorts
<MENU> screen
<SET
-UP MENU> screen
Picture adjustment
V
olume
HOW TO INITIALIZE THE
SETTING
SCREEN DISPLAY AND SELECTIONS IN THE
<SET-UP MENU> RESET MODE
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and
the volume level to their factory-set (initial) values.
1. Press the Power switch to set the unit to STAND
BY ( ) mode.
The <SET-UP MENU> RESET screen is displayed.
* The screen automatically disappears when no operation
is performed after about 5 minutes.
POWER
PHASE MENU
ON
STAND BY
Initial settings
<SET-UP MENU> RESET screen
2. While pressing both MENU button and PHASE ( )
button, press the Power switch to turn the power ON
(
).
3. Setting
䢇
Initialization is required.
䢇
Initialization is not required.
Press the CONTRAST ( ) button.
* Initialization is completed, and the <SET-UP MENU>
RESET screen disappears.
Press the VOLUME/SELECT [+] or [–] button.
* Initialization is aborted, and the <SET-UP MENU>
RESET screen disappears.
CONTRAST
VOLUME/SELECT
– +
●
The <SET-UP MENU> RESET screen will not be
displayed if the MENU or PHASE buttons are pressed
for a very short time. Keep pressing them until the
display screen appears.
Note:
POWER
ON
STAND BY