JVC TK-C655, Инструкция по эксплуатации, Страница: 38 / 48

38
Setting Up the Camera Using an RM-P2580
AUTO PATROL Setup
Use the AUTO PATROL screen to set the configuration of the auto patrol function, which moves the camera between several positions
at a high speed.
Patrol positions 1-100 can be set in each of three modes (MODES 1 to 3). It is recommended that these three modes be set the
according to the day of the week or the time of day. For example: MODE 1 for nighttime and MODE 2 for daytime.
1.
Select the camera. (
☞
RM-P2580 Instruction manual)
CAMERA button → Numeric key (camera number) → ENTER button.
The picture of the selected camera is output.
2.
Display the SETUP menu on the camera.
(
☞
P. 20, steps
1
to
4
)
MENU button (3 sec.) → Select “CAMERA” with the PAN/TILT lever
→
SET button.
3.
Tilt the PAN/TILT lever up or down to move the cur-
sor (>) to “AUTO PAN/PATROL/TRACE” and press
the SET button.
The AUTO PAN/PATROL/TRACE menu is displayed.
4.
Move the cursor (>) to “AUTO PATROL SET” and
press the SET button.
The AUTO PATROL MODE 1 screen is displayed.
5.
Tilt the PAN/TILT lever to move the cursor (>) to the
PATROL position to be set.
• To display the next page (PATROL positions 9 to 16), press the
TELE button.
• To display the previous page, press the WIDE button.
6.
Set a patrolled position.
POSITION button → Numeric key (position number) → ENTER button.
• At the factory settings, positions PATROL 1 to 100 are set to HOME
to 99 in that order.
7.
Set the length of time a camera will stay in each
position.
• Use the PAN/TILT lever to the left or right to set the time period.
• Available setting values: SKIP, 5s, 10s, 20s, 30s, 45s, 1min, 2min.
(Selecting “SKIP” skips that position and moves to the next position.)
• The factory setting is “10s” for all positions.
8.
Repeat steps
5
to
7
for each patrolled position.
• Set the patrolled positions and time periods of all patrol numbers
in this way.
9.
Change the auto patrol mode.
• Press the FAR or NEAR buttons to change the mode.
• After changing to a new mode, repeat steps
5
to
8
.
10.
Press the MENU button.
• The screen returns to the previous menu.
• After the above setup, auto patrol of the camera can be started by
pressing the AUTO PATROL button on the RM-P2580.
• To change the auto patrol mode after the above setup, display the
AUTO PATROL MODE screen and press the FAR or NEAR but-
tons.
• The auto patrol function can only be set from an RM-P2580. Note
that it differs to auto sequence operations available with other re-
mote control units.
AUTO PAN/PATROL/TRACE menu
A U T O P A N M O D E R E T U R N
– – – A U T O P A N / P A T R O L / T R A C E – – –
A U T O P A N S P E E D N O R M A L
A . P A N S T A R T P O S . S E T . .
A . P A N R E T U R N P O S . S E T . .
A U T O P A T R O L S E T . .
A U T O T R A C E S E T . .
R M A . P A N K E Y A . P A N
R M A . P A T R O L K E Y A . P A T R O L
AUTO PATROL MODE 1 screen
(Example showing PATROL Nos. 9 to 16)
P A T R O L 9 P O S 8 1 0 s
– – – A U T O P A T R O L MO D E 1 – – –
P A T R O L 1 0 P O S 9 1 0 s
P A T R O L 1 1 P O S 1 0 1 0 s
P A T R O L 1 2 P O S 1 1 1 0 s
P A T R O L 1 3 P O S 1 2 1 0 s
P A T R O L 1 4 P O S 1 3 1 0 s
P A T R O L 1 5 P O S 1 4 1 0 s
P A T R O L 1 6 P O S 1 5 1 0 s
F W D / B W D
/
Z O O M M O D E
/
F O C U S
AUTO PATROL MODE 1 screen
(Example showing PATROL Nos.1 to 8)
P A T R O L 1 H OM E 1 0 s
– – – A U T O P A T R O L MO D E 1 – – –
P A T R O L 2 P O S 1 1 0 s
P A T R O L 3 P O S 2 1 0 s
P A T R O L 4 P O S 3 1 0 s
P A T R O L 5 P O S 4 1 0 s
P A T R O L 6 P O S 5 1 0 s
P A T R O L 7 P O S 6 1 0 s
P A T R O L 8 P O S 7 1 0 s
F W D / B W D / Z O O M M O D E / F O C U S
SETUP
MENU SET
SPEED
IRIS
AF
FOCUS
ZOOM
OPEN
FAR
TELE CLEAR
/HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO
PAN
OPTION
1
OPTION
2
CAMERA POSI-
TION
AUTO
PATROL
CLOSE
NEAR
WIDE
AUTO F-1 F-2 F-3
PAN/TILT LENS CAMERA/POSITION
CAMERA POSITION
REMOTE CONTROL UNIT RM-P2580
ALARM
POWER
KEY LOCK
PAN/TILT
lever
CAMERA
button
WIDE button
FAR button
TELE button
NEAR button
ENTER
button
SET button
MENU button
High
speed
High speed High speed
High
speed
POSITION
1
POSITION
3
POSITION
2
POSITION
4
TK-C676-C655_LWT0200-001C 06.4.14, 4:43 PM 38