JVC TK-C400E, Руководство по обслуживанию

Страница: 51 / 52

5-13
5-13
TK-C400/ TK-C401
For EG Version
WARNING-THIS APPLIANCE MUST BE EARTHED IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
GREEN-AND-YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows. The wire which is coloured GREEN-AND-YELLOW must be connected to the
terminal in the plug which is marked with the letter E or by the safety earth symbol
G or coloured GREEN or GREEN-AND-
YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or
coloured RED.
The lightning flash with arrowhead symbol, within an equi-lateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
For USA and CANADA
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
For Customer Use:
Enter below the Serial No. which is located on the top of the body.
Retain this information for future reference.
Model No. TK-C400 or TK-C401
Serial No.
INFORMATION (FOR CANADA) RENSEIGNEMENT (POUR LE CANADA)
This Class [B] digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe [B] respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Information for USA
This device complies with Part 15 of the FCC Rules.
Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.
Lens Flange back (c) Dimension (b)
C mount lens 17.526mm 10mm or less
CS mount lens 12.5mm 5.5mm or less
Lens DC IRIS VIDEO IRIS
Pin No. (does not contain EE amprifire) (contain EE amprifire)
1 Brake – 9.5V [max 50mA]
2 Brake
+
NC
3 Drive + VIDEO
4 Drive – GND
COLOR VIDEO CAMERA Instructions
Thank you for purchasing the JVC color video camera.
To obtain the best results from your new camera, read these instructions carefully before use;
retain the manual for future reference.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOIS-
TURE.
Due to design modification, data given in this instruction book are subject to possible change
without prior notice.
PRECAUTIONS
• If an AGC switch is turned on, the sensitivity increases automatically in dark places. It is not a
failure when the image looks grainy.
• If a zoom lens is used, check the back focus before mounting the camera. This also applies to
lens ALC and LEVEL. (See the instructions on lenses for details.)
• If a high-intensity object (such as a lamp) is shot, the image on the screen may have vertical
lines (smear) or blur (blooming) at its periphery (especially in AES mode). This is a character-
istic of the CCD, and is not a defect.
• If an EE lens is used, set the automatic electronic shutter switch (AES) to OFF. If set to ON,
flickering may occur. If a manual iris lens is used, set the AES to ON.
• When used in hot places, vertical lines may appear on the screen of this camera. This is a
characteristic of the CCD and not a failure of the camera.
• The automatic tracking system may not function properly when shooting with non-standard
lighting or lighting with a color temperature which exceeds the capability of the camera. In
such a case, set to the “MANU” position.
• If the camera subject is a single solid color (other than white), the auto white circuit will nor-
mally attempt to change this color to white. In the case of this camera, if it cannot make a
correct prediction, the previous white balance setting will be maintained until the subject colors
become more varied.
• Where there are strong electromagnetic waves or magnetism, for example near a radio or TV
transmitter, transformer, motor, etc., the picture may contain noise and the colors may be
incorrect.
MOUNTING A LENS
1. Before mounting a lens, check whether it is a C-mount or CS-mount lens.
If a C-Mount lens is used, loosen the back focus locking screw (a), and then turn the
back focus adjustment ring with a screw driver or other tool with a tapered tip in the
direction indicated by the arrow to change the mounting method.
2. Dimension (b) of the lens shown in the illustration must be as shown in the table
below. If (b) exceeds the value in the table, it may damage the inside of the camera or
correct mounting may be impossible; never use such lenses. Do not attach the C-
mount lens when using a CS-mount.
The F mark indicates a focal point.
3. Mount the lens on the camera by turning the lens clockwise. Adjust its posiiton.
4. When using an auto-iris lens with an EE amplifier, turn the switch to the “VIDEO”
side. When no EE amplifier is equipped, turn the switch to the “DC” side.
5. If the lens has an auto-iris mechanism,
Connect the lens cable after checking the pin arrangement.
If the lens cable has a different type of plug, use the 4-pin plug supplied.
6. If the cable is too long, house it in the camera mounting bracket.
CONNECTION
1. When the camera is powered, the POWER LED lights up.
TK-C400U/E only
• Never connect the DC 12V and AC 24V power inputs simultaneously.
• Be sure to observe the c, – polarity when connecting a DC 12V power input.
TK-C401EG only
When you use this camera, the socket-outlet must be installed near the equipment to make
disconnect on easily.
2. Connect to a video monitor, etc. (75
Ω
)
3. To install the camera onto a tripod, fixing unit, or pan/tilt unit, use the fall-preventive
socket (d) shown in the illustration.
Special precautions must be taken for mounting the camera on a wall or a ceiling.
We are not liable for any damage caused by improper installation.
4. Installation of camera
U type
• Mounting from the bottom
This camera is originally designed to be mounted from the bottom, as shown
1
. The hole is
standard photographic pan-head screw size (1/4"-20). Example the Fixing unit or Pan/Tilt unit.
• Mounting from the top
Remove the CAMERA MOUNTING BRACKET (e) from the bottom of the camera by removing
three fixing screws as shown
2
. Attach the CAMERA MOUNTING BRACKET (e) to the top,
then mount the camera on the Fixing Unit as shown
3
. Make sure that three original screws
are used when mounting the CAMERA MOUNTING BRACKET (e); longer type screws (over
5mm) may damage inner components.
(This camera is used indoor and under similar conditions.)
E type
The E/EG type has been factory-shipped as shown in
3
, and so follow the procedure in reverse
order when the CAMERA MOUNTING BRACKET is to be replaced.
A
(a)
(b)
(c)
F
C
COLOR VIDEO CAMERA
B
D
E
F
(d)
w
q
e
CAMERA type power
TK-C400U AC 24V
~
(class 2 only) or DC 12V
TK-C400E AC 24V
~
(isolated power only) or DC12V
TK-C401EG AC 220-240V
~
(e)
2 1
4 3
∆
A
∆
B
∆
C
∆
D
∆
E
∆
F