EN
EN - 7
Wall Mounting (if using Option B)
• Installation must be carried out by qualified personnel only. Incorrect assembly can result in
severe personal injury and property damage (if you intend to install this product yourself, you
must check for installations such as electrical wiring and plumbing that may be buried inside
the wall). It is the installer’s responsibility to verify that the wall will safely support the total
load of the Soundbar and wall brackets.
• Additional tools (not included) are required for the installation.
• Do not overtighten screws.
• Keep this instruction manual for future reference.
• Use an electronic stud finder to check the wall type before drilling and mounting.
WARNING
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
with the installation instructions.
•
Suggested wall mounting height: ≤ 1,5 meters.
1.
Drill 4 parallel holes (Ø 5,5-6 mm eachaccording to wall type) in the wall. The distance
between the holes should be 793 mm.
2. Firmly fix 1 dowel into each hole in the wall if necessary. Tighten the wall mount brackets
on the wall with screws and screwdriver (not included). Make sure that they are securely
installed.
3. Loosen the screws at the back of the Soundbar. Leave approximately 3 mm between the
screw head and the surface of the Soundbar.
4. Lift the Soundbar onto the wall mount brackets and slot into place.
