JVC TH-A55, Руководство по обслуживанию

Страница: 17 / 73

(No.MB108)1-17
3.3.11 Removing the feed motor
(See Figs.15 to 17)
• Prior to performing the following procedures, remove the DVD
servo board, clamper base and DVD traverse mechanism as-
sembly.
(1) From the top side of the DVD traverse mechanism assem-
bly, remove the feed motor wire that is soldered to the spin-
dle motor board. (See Fig.15)
(2) Remove the screw H attaching the feed holder assembly
and then take out the feed holder assembly. (See Fig.15)
(3) Remove the screw J attaching the thrust spring. (See
Fig.16)
(4) Remove the feed gear and lead screw in the direction of the
arrow. (See Fig.16)
(5) Remove the two screws K attaching the feed motor. (See
Fig.17)
Fig.15
Fig.16
Fig.17
H
Feed motor
H
Remove the solders.
DVD traverse mechanism assembly
Feed motor
wire
Spindle motor board
Feed holder
assembly
Feed holder assembly
J
Feed motor
Feed gear
Lead screw
Thrust spring
Feed holder assembly
K