JVC Super LoLux HD VN-H257VPU, Инструкция по эксплуатации

Страница: 37 / 128

37
* The [Set values] in bold letters are factory defaults.
B
1st Trigger Select the 1st trigger to perform an action.
[Set values: Pin Input1 Make, Pin Input1 Break, Pin Input2 Make, Pin
Input2 Break, Position, Audio Detection1, Audio Detection2
(VN-H57U/H257U/H257VPU/H157WPU only), Motion
Detection, Tampering Detection, Black & White, Day/Night,
Time
]
Memo:
●
If you set the [2nd Trigger] to "Disable", an action will be performed when
only [1st Trigger] is triggered. (VN-H57U/H257U/H257VPU/H157WPU
only)
●
When "Motion Detection" or "Position" is selected for the [1st Trigger]
trigger, [Max. Interval] and [2nd Trigger] cannot be selected. (VN-H57U/
H257U/H257VPU/H157WPU only)
●
"Time" can be specified only when the action is "Switch Scene File".
C
Max. Interval
(VN-H57U/
H257U/H257VPU/
H157WPU only) This is available when both [1st Trigger] and [2nd Trigger] are set.
Specify the maximum interval between each trigger for [1st Trigger] and [2nd
Trigger].
An action will be performed if [2nd Trigger] occurs within the maximum time
interval after [1st Trigger] occurs.
[Set values: 1 - 3600] sec
D
2nd Trigger
(VN-H57U/
H257U/H257VPU/
H157WPU only) Select the 2nd trigger to perform an action.
[Set values: Disable , Pin Input1 Make, Pin Input1 Break, Pin Input2 Make,
Pin Input2 Break ]
E
Mail Mail Settings : If you have set the [SMTP Server], [Port Number], and
[Sender Mail Address] on the [Alarm Environment]
page, the
A Configured B message is shown. If not set,
the A Not configured B message is shown. For details
about the mail setup, refer to "Alarm Environment
Page". (
A
Page 40)
Mail Address : Enter the recipient's mail address.
Mail Text : Enter the mail text. You can enter text consisting of up
to 127 alphanumeric characters. Or a text of up to 63
dual-byte characters can be entered.
JPEG Attachment : Specify whether or not to attach an image file to the
mail. To attach JPEG images, check the Attach box and
select the transmission channel.
Encoder : Specifies an Encoder No. for encoding of attached
JPEG files.
Memo:
●
You cannot select [Attach JPEG] if there is no channel with Encode set to
JPEG.