23
Normal display in the shooting mode
q
w
e
r
t
y
No.
Item
Contents
1
Zoom ratio (Characters, Displayed during zoom operation. The characters indicate the wide-
numeric value)
angle (W) and telephoto (T) zoom positions. The numeric value indicates
the approximate zoom ratio.
2
Time code display
Shows the time code (hours, minutes, seconds, frames).
Whether this should be displayed can be selected by setting the TIME
CODE item on the DISPLAY [2/2] menu screen.
3
Recording time mode
Shows the recording speed at the time of the recording.
indication
SP : Standard Play mode
LP
: Long Play mode
When the remaining tape indication is OFF, this indication is shown at
the
4
position.
4
Remaining tape time
Indicates the remaining tape amount (minutes) in 1-minute steps.
indication
Whether this indication should be ON or OFF can be selected by setting
the TAPE REMAIN item on the DISPLAY [2/2] menu screen.
* The indication may not appear when a new tape is loaded, after the
tape runs, the indication appears.
* When used in a cold environment, it may take a little while before the
remaining tape time indication appears.
5
Remaining battery
The remaining battery power is indicated by four dif ferent indicators.
power indication
6
Camera-shake
Displayed when the camera-shake compensation function is on (OIS
compensation on
item on the OPERATION menu screen is set to ON).
indication
Blinking indicator
(no remaining
battery power)
Fully charged
battery
