JVC SR-V10E, Инструкция по эксплуатации

Страница: 30 / 68

Filename [SR-V10E2-EN.fm]
Masterpage:Left
30
EN
Page 30 September 3, 2002 1:07 pm
TIMER RECORDING (cont.)
Express Timer
Programming
If you do not know the S
HOW
V
IEW
number for the programme
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
A
Access the S
HOW
V
IEW
screen.
Press PROG .
B
Access the Programme screen.
The front display panel looks like this:
C
Enter the programme start time.
The front display panel looks like this:
D
Enter the programme stop time.
Press STOP+/– to enter the time you want recording to
stop.
●
Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter the programme date.
Press DATE+/– .
●
The current date appears on the TV screen. The date you enter
appears in its place.
Before performing Express Timer Programming:
●
Make sure that the recorder’s built-in clock is set properly.
●
Insert a cassette with the safety tab in place. If the tab has
been removed, set “REC SAFETY” to “OFF” (
墌
pg. 48).
The recorder will come on automatically.
●
Turn on the TV and select the video channel (or AV mode).
ATTENTION
It is impossible to perform timer programming during
recording.
Press START+/– . (If you’re
just starting out, “P1”
appears.)
Press START+/– to enter the
time you want recording to
start.
●
Press and hold START+/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
SR-V10E2-EN.fm Page 30 Tuesday, September 3, 2002 1:08 PM