![JVC SR MV45U Скачать руководство пользователя страница 52](http://html.mh-extra.com/html/jvc/sr-mv45u/sr-mv45u_instructions-manual_177825052.webp)
Filename [SR-MV45_55U_10Editing.fm]
Masterpage:Left+
52
EN
Page 52
January 10, 2007 1:18 pm
EDITING
You can use a camcorder as the source player and your unit as the
recording deck.
1
Make connections.
A
If the camcorder has no S-VIDEO output connector:
— connect the camcorder’s Audio/Video output connector to the
unit’s [AUDIO IN F-1] and [VIDEO IN F-1] input connectors on the
front panel.
●
When using a monaural camcorder, connect its AUDIO OUT
connector to the [AUDIO L] input connector on your unit.
B
If the camcorder has an S-VIDEO output connector:
— connect the camcorder’s Audio/Video output and S-Video
output connectors to the unit’s [AUDIO IN F-1]
and [S-VIDEO IN
F-1] connectors on the front panel.
2
Press
VCR/DVD
repeatedly to select the recording deck.
3
Press
INPUT /–
on the unit or
INPUT +/–
on the
remote control to select “F-1”.
●
Set “FRONT AUX F-1” to “VIDEO” for the [VIDEO IN F-1] connector,
or “S-VIDEO” for the [S-VIDEO IN F-1] connector, depending on the
connector being used. (
pg. 59) This setting is also applied to the
VCR deck.
4
For VCR deck only
Set “PICTURE CONTROL” to the appropriate mode. (
5
Press
REC MODE
repeatedly to set the recording mode.
6
Start playback on the camcorder slightly before the actual point
from where you wish to start dubbing.
For VCR deck only
Press
7
and
9
simultaneously to set to record pause mode.
7
Press
7
on the unit to start recording. Or while holding
7
, press
4
on the remote control. The dubbing starts.
For VCR deck only
After about 10 seconds, press
4
to start recording.
8
Press
8
on the unit, then stop playback on the camcorder.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
Refer to the camcorder’s instruction manual for operating procedure.
●
The quality of dubbed picture becomes poorer than that of the
original.
●
When you select “EDIT” to dub tapes in step
, be sure to select
“AUTO” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”)
after you finish dubbing the tapes.
Edit From A Camcorder
A
If the camcorder has no S-VIDEO output connector:
Recorder
Player
Audio/Video cable
(not supplied)
To [AUDIO IN F-1]
To
[VIDEO
IN F-1]
To Audio/Video
output
B
If the camcorder has an S-VIDEO output connector:
Recorder
Audio/Video cable (not supplied)
To S-Video output
To Audio/Video
output
Player
S-Video cable
(supplied)
To [AUDIO IN F-1]
To [S-VIDEO
IN F-1]
Slide the
TV/CABLE/DBS/DVD
switch to
DVD
.
SR-MV45_55US.book Page 52 Wednesday, January 10, 2007 1:18 PM