8
NOTES:
•
If no disc is inserted or no USB mass storage class device is
connected, “NO DISC” or “NO USB” appears on the main
display.
•
If MP3/WMA files are not recorded on the disc or in the
USB mass storage class device, “NO PLAY” appears on the
main display.
Playing Repeatedly—Repeat Play
1
Press repeatedly to specify the repeat
mode as follows:
REP TRK:
Repeats the current (or
specified) track. [
]
REP GRP:
Repeats all tracks in the
current group (MP3/WMA
only). [ ]
REP ALL:
Repeats all tracks.
[
ALL
]
REP OFF:
Normal playback
2
or
Programming the Playing Order
—Program Play
1
During stops, press until the PRGM
(program) indicator lights up before
playing.
2
or
• For MP3/WMA files: Select a group
number, then a track number.
• For CD: Select a track number.
3
Press to program the selected group/
track.
4
Repeat steps
2
and
3
to program other tracks
you want.
• If you try to program a 51st track, “FULL” will
appear.
5
The tracks are played back in the
programmed order.
Operations for Program Play (while not playing)
•
To check the programmed contents,
press
4
or
¢
.
•
To add tracks,
repeat steps
2
and
3
above.
•
To erase the last programmed track,
press CANCEL.
•
To erase the entire program,
press and hold CANCEL
for about 2 seconds.
•
To exit from program play,
press MODE.
– The stored program is kept.
Playing at Random—Random Play
1
Press until the RND (random) indicator
lights up before you start playback.
2
or
Playback starts in random
order.
Random Play ends when all
tracks are played back.
Operations for Random Play
•
To skip a track,
press
¢
.
•
To go back to the beginning of the current track,
press
4
.
•
To exit from random play,
press MODE while
playback is stopped.
RESUME Play (For MP3/WMA only)
When you stop the playback by one of the following
operations, this System stores the beginning of the
stopped track on the disc or USB mass storage class
device.
– Pressing
7
once
– Changing the source
When you start playback again, playback starts from
the stored position.
To clear the stored position,
open the disc tray or
disconnect the USB mass storage class device.
• When you clear the stored position and start
playback, playback starts from the beginning of the
first track.
NOTE:
This function does not work in Program Play and
Random Play.
Prohibiting Disc Ejection
(on the System only)
You can lock the disc tray so that no one can eject the
loaded disc.
• This is possible while the System is on standby.
To cancel the prohibition,
repeat the same procedure.
EN01-12_UX-G800D[B]3.indd 8
EN01-12_UX-G800D[B]3.indd 8
2/21/08 6:34:50 PM
2/21/08 6:34:50 PM
