EDITING
Page 69March 28, 2005 9:23 pm
Filename [TH-R1R3EU_09Editing.fm]
Masterpage:Left+
69
L-1 Output And L-1 Input Setting
The [L-1 INPUT/OUTPUT] connector accepts and delivers either a
composite signal (regular video signal) or a Y/C signal (a signal in
which the luminance and chrominance signals are separated). Set
and
to the appropriate mode depending
on the type of appliance connected to the unit’s [L-1 INPUT/
OUTPUT] connector.
1
Press
to access the Main Menu screen.
2
Press
selection keys
to select
press
3
Press
selection keys
to select
for
confirmation.
4
Press
selection keys
to select
, then press
.
5
Press
selection keys
to select the appropriate setting, then press
6
Press
\
* The
boldface
settings below indicate the settings at your purchase.
8
/
/
If a connected appliance’s input is compatible only with regular
video signals, set to
.
If a connected appliance’s input is compatible with Y/C signals,
set to
. You can obtain a high quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
If a connected appliance’s input is compatible with RGB
signals, set to
. You can obtain a high quality
RGB picture.
If a connected appliance’s input is compatible with Y/P
B
/P
R
. You can obtain a high quality
Y/P
B
/P
R
picture. Switch the TV to the input that you can watch
component video pictures.
8
/
If a connected appliance’s output is compatible only with regular
video signals, set to
If a connected appliance’s output is compatible with Y/C
signals, set to
. You can obtain a high quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
●
is set to
or
is not possible to set
.
●
is set to
is not possible to set
.
●
is set to
, it is only possible to set
to
●
Component video signals are not output from the [L-1 INPUT/
OUTPUT] connector.
●
When Progressive scan mode is engaged, it is not possible to
select the setting of
on the left column.
L-1 And L-2 Audio Input Setting
You can select to input audio signals through the coaxial digital/
optical [L-1/L-2 DIGITAL INPUT (COAXIAL/OPTICAL)] or analogue
connectors depending on the appliance connected to the unit.
There is a time limit when performing the following setting. If the
time is up before completing the setting, re-perform from the
beginning.
1
Press
The item of the setting performed most recently is displayed on
the front display panel.
2
Press
to display the L-1, L-2 input setting on the front
display panel.
3
Press
or
to select the desired audio input.
Each time you press
, the L-1 and L-2 combination is
displayed in the sequence as shown below:
(back to the beginning)
AN: Analogue signal input
OP: Optical signal input
CO: Coaxial digital signal input
Output/Input Set
●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
●
Set the remote control selector switch to
●
Press
1
2
3
4
5
6
7
8
9
0
VOL
SAT
TV
AUDIO
(
FGDE
)
ENTER
SETTING
SET UP
DVD
Selection Keys
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
VIDEO IN/OUT
RECORDING SET
OTHERS
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
MONITOR TYPE
F-1 INPUT
L-1 INPUT
DISPLAY SET
L-1 OUTPUT
L-2 SELECT
4:3LB
VIDEO
VIDEO
SCART VIDEO
S-VIDEO/RGB
EXIT
OK
SELECT
SET UP
TH-R1R3EU_00.book Page 69 Monday, March 28, 2005 9:23 PM
