66
3. Enter a manufacturer’s code using
buttons 1–9, and 0.
See page 67 to find the code.
4. Release AUDIO
.
After pressing CD, you can perform the following operations on
a CD player:
1–9, 0, +10
: Selects the tracks.
PLAY
: Starts playing.
REW
: Fast-reverses the tracks.
FF
: Fast-forwards the tracks.
STOP
: Stops playing.
PAUSE
: Stops playing temporarily. To release, press
PLAY.
Note:
Refer to the manual supplied for your CD player.
5. Try to operate your CD player by pressing one of
the above buttons.
• DO NOT forget to turn on the CD player before pressing one
of the above buttons.
If more than one code is listed for your brand of CD,
try each
one until the correct one is entered.
Manufactures’ codes for TV
Manufacturer
Codes
JVC
00
*
, 13, 74
Akai
01, 02
Blaupunkt
03, 04
Fisher
01, 05
Grundig
03, 06, 07
Hitachi
08, 09, 10, 49, 78
Irradio
02
ITT/Nokia
11, 12
Loewe
06, 15, 16
Magnavox
08, 17, 49
Matsushita
86, 87
Mets
50, 51, 52, 53
Mitsubishi
08, 18, 19, 20
Mivar
21
NEC
83
Nordmende
22, 23
Okano
15
Panasonic
24, 25, 26, 27, 76
Philips
15, 17, 28, 75
Pioneer
85
RCA/Proscan
08, 24, 29, 30, 31, 48
SABA
32, 33, 68, 69, 70
Samsung
06, 08, 16, 34, 35, 49
Sanyo
01, 05, 81
Schneider
02, 15, 36
Sharp
37, 38, 77, 88
Sony
39, 80
Telefunken
40, 41, 42, 69
Thomson
71, 72
Toshiba
37, 43, 44, 79
Zenith
45, 46
*This figure is set to the remote control as the initial JVC code.
To change the transmittable signals for
operating another manufacturer’s DVD player
1. Press and hold DVD
.
2. Press DVD.
3. Enter a manufacturer’s code using
buttons 1–9, and 0.
See page 67 to find the code.
4. Release DVD
.
After pressing DVD or DVD MULTI, you can perform the
following operations on a DVD player:
1–9, 0, +10
: Selects the titles or the chapters.
PLAY
: Starts playing.
4
: Returns to the beginning of the current (or
previous) chapter.
¢
: Skips to the beginning of the next chapter.
STOP
: Stops playing.
PAUSE
: Stops playing temporarily. To release, press
PLAY.
After pressing DVD MENU, these
buttons can be used for the DVD
menu operations.
Note:
Refer also to the manual supplied for your DVD player (and the
instructions supplied for the discs).
5. Try to operate your DVD player by pressing one
of the above buttons.
• DO NOT forget to turn on the DVD player before pressing
one of the above buttons.
If more than one code is listed for your brand of DVD player,
try each one until the correct one is entered.
To change the transmittable signals for
operating another manufacturer’s CD player
1. Press and hold AUDIO
.
2. Press CD.
EFFECT
LIVENESS
FM MODE
RETURN
100+
1
2
3
4
5
6
7
/P
8
9
10
+
10
0
DVD
DVD
Remote’s display
EFFECT
LIVENESS
FM MODE
RETURN
100+
1
2
3
4
5
6
7
/P
8
9
10
+
10
0
SET
DVD
MENU
AUDIO
CD
Remote’s display
EN61-74_RX-DP20VSL[B]f.pm5
03.5.21, 19:08
66
