(No.MB303)1-7
3.5
Removing the front panel assembly
(See Figs.5 and 6)
• Prior to performing the following procedures, remove the top
cover, rear panel and I/O board.
(1) From the top side of the main body, remove the tie bands
bundling the wires. (See Fig.5)
(2) Disconnect the wire from the connector
CN599
on the DSP
board. (See Fig.5)
(3) Disconnect the wire from the connector
CN415
on the
audio2 board. (See Fig.5)
(4) Disconnect the wire from the connector
CN206
on the vid-
eo board. (See Fig.5)
(5) Disconnect the wire from the connector
CN244
on the S-
Video board. (See Fig.5)
(6) Disconnect the card wire from connector
CN402
on the
power supply board. (See Fig.5)
(7) Disconnect the card wire from connector
CN400
on the mi-
con board. (See Fig.5)
(8) Remove the tie band and wire protection board fixing the
card wire. (See Fig.5)
(9) Remove the two screws
G
, screws
G'
and screw
H
attach-
ing the front panel assembly. (See Fig.5)
(10) From the bottom side of the main body, remove the four
screws
J
attaching the front panel assembly. (See Fig.6)
(11) Remove the front panel assembly in the direction of the ar-
row. (See Fig.6)
Reference:
When attaching the screw
G'
and screw
H
, attach the earth
wire with it.
Fig.5
Fig.6
G'
G
G
H
Front panel assembly
Earth wire
Earth wire
CN402
Power
supply
board
Tie
band
Tie
band
Micon
board
CN244
S-Video board
Video board
CN206
CN415
Audio2 board
CN599
DSP
board
CN400
Tie
band
Card
wire
Tie
band
Wire
protection
board
J
J
Front panel assembly
