47
CD player-changer
After pressing CD-DISC (with the remote control mode selector set
to “AUDIO/TV/VCR”), you can perform the following operations
on a CD player-changer:
PLAY
:
Starts playing.
4
4
4
4
4
:
Returns to the beginning of the current (or previous)
track.
¢
¢
¢
¢
¢
:
Skips to the beginning of the next track.
STOP
:
Stops playing.
PAUSE
:
Pauses playing. To release it, press PLAY.
1 – 6, 7/P
:
Selects the number of a disc installed in a CD
player-changer.
After pressing CD (with the remote control mode selector set to
“AUDIO/TV/VCR”), you can perform the following operations on
the CD player-changer:
1 – 10, +10
:
Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301)
you can do the following operations using the number buttons after
pressing CD.
1. Select a disc number.
2. Then select a track number (always enter two digits).
3. Start playback.
EXAMPLES:
• Selecting disc number 3, track number 2, and starting playback.
Press 3, then, 0, 2, then
3
.
• Selecting disc number 10, track number 5, and starting playback.
Press 1, 0, then, 0, 5, then
3
.
• Selecting disc number 105, track number 12, and starting
playback.
Press 1, 0, 5, then 1, 2 then
3
.
CD recorder
After pressing CDR/VCR 2 (with the remote control mode selector
set to “AUDIO/TV/VCR”), you can perform the following
operations on a CD recorder:
PLAY
:
Starts playing.
4
4
4
4
4
:
Returns to the beginning of the current (or
previous) track.
¢
¢
¢
¢
¢
:
Skips to the beginning of the next track.
STOP
:
Stops playing.
PAUSE
:
Pauses playing. To release it, press PLAY.
1 – 10, +10
:
Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Note:
When you start recording on the CD recorder, use the buttons on the
CD recorder itself or on the remote control supplied with it.
Turntable
After pressing PHONO (with the remote control mode selector set to
“AUDIO/TV/VCR”), you can perform the following operations on a
turntable:
PLAY
:
Starts playing.
STOP
:
Stops operations.
Cassette deck
After pressing TAPE/MD or TAPE/MD CONTROL (with the
remote control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on a cassette deck:
PLAY
:
Starts playing.
1
1
1
1
1
:
Fast winds the tape from right to left.
¡
¡
¡
¡
¡
:
Fast winds the tape from left to right.
STOP
:
Stops operations.
PAUSE
:
Pauses playing. To release it, press PLAY.
¶
REC
:
Press this button with the PLAY button to start
recording.
Press this button with the PAUSE button to enter
recording pause.
MD recorder
After pressing TAPE/MD or TAPE/MD CONTROL (with the
remote control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the MD recorder:
PLAY
:
Starts playing.
4
:
Returns to the beginning of the current (or previous)
track.
¢
:
Skips to the beginning of the next track.
STOP
:
Stops playing.
PAUSE
:
Pauses playing. To release it, press PLAY.
¶
REC
:
Press this button with the PLAY button to start
recording.
Press this button with the PAUSE button to enter
recording pause.
Note:
You can use either TAPE/MD button or the TAPE/MD CONTROL
button to activate the buttons listed above. If you press TAPE/MD, the
playing source also changes. On the other hand, if you press TAPE/
MD CONTROL, the playing source does not change.
EN44_54.RX-8000V[J]/f
00.1.13, 11:55 AM
47
